Module for the control of two predefined DALI groups with a conventional light button
The DALI GC and GC-A are control units for the control of 2 DALI groups. With help of this compact module, light switches or buttons can send dimming and switching commands to two DALI groups.
A rotary switch on the housing DALI GC/GC-A offers the possibility to preselect the DALI resp. luminaire group. The modules are installed in the flush-mounted box behind the light switches and get their supply directly from the DALI-Bus.
The DALI GC offers in contrast to the DALI GC-A the possibility, to address luminaires and add them to groups resp. delete them.
Compact control module to generate switching or dimming commands for two DALI groups
With help of a rotary switch on the module housing the selection of the DALI groups that are addressed happens.
The inputs can be controlled with standard buttons
Multiple modules can be installed within a DALI circuit
The module can be installed in a flush-mounted box or directly behind the light button
The supply of the module happens directly through the DALI line and doesn't have to be connected to the grid
The buttons are connected directly to the module (make potential-free contact)
Supply: via DALI bus
Current consumption: 6 mA
Inputs: 2 buttons single/double
Outputs: DALI (broadcast)
Groups: 2 of 16 (broadcast)
Group selection: rotary switch
Temperature: 0 ░C - 50 ░C
Protection type: IP20
Connected wires: 0.75 mm2
Connected length: 250 mm
Dimmable/ControlAvailability to control illumination:DALIDALI - specific lightinginterface. Needs further components like DALI-Controller. Each drivers has its own adress and via BUS-control it provides continously opportunity to dim and switch the light.