Operate PWM signals via DALI commands control.
The DAP 04 more specifically DAP-04 S01 DALI PWM interface converts DALI into PWM signals.
The DALI PWM Converter is available as DAP 04 and DAP-04 S01(Successor of the best-selling DAP-04EU) version.
There are 4 PWM outputs available, which are addressed via DALI. Each one can be controlled separately.
In this way, all LED transformers and LED drivers with PWM input for dimming can be controlled
like the Mean Well HLG series.
It is possible to dim in a very flexible range of 1% to 100%, optionally linear or logarithmic. It`s your choice to create it comfortable.
Via DALI you can dim a variety of LED transformers with PWM input.
Differences between version DAP 04 and DAP-04 S01 DALI PWM interface:
Selection output signal between high and low active PWM
Choose between 1 till 4 addressed DALI outputs. If only one output is assigned, than the DALI system will be used more efficiently.
The mode can be selected by jumper.
|Input voltage range||90 - 305 VAC / 127 - 431 VDC|
|Frequency range||47 - 63 Hz|
|Inrush current||15A @ 230V AC|
|Input signal||DALI or Push dim|
|Output signal||4 x PWM, 1KHz|
|Output logic||see datasheet|
|Dimming||1% - 100%|
|Operating conditions||-30°C - 60°C, 20-90% humidity|
|Storage conditions||-40°C - 80°C, 10-95% humidity|
For further technical data please refert to tab DOWNLOAD
Write the first Review!
SRC-DALI wireless EnOcean receiver to control the lighting via radio with for example Mini EasySens wireless switch
Maxi Jolly HC BI DALI LED driver 55W for high LED current. 1,05A, 1,2A, 1,4A, 1,6A, 1,75A, 2,1A const.
EnOcean repeater increase distance between EnOcean sensors, EnOcean actors and control systems with EnOcean interface
Maxi Jolly DALI with 350mA up to 1050mA by dip-switch.
to control / dim your DALI luminaires via EnOcean radio. Integrated DALI power supply!
Maxi Jolly HC DALI TCM LED driver 55W. High LED currents:1,05A, 1,2A, 1,4A, 1,6A, 1,75A, 2,1A const, 48V const.