This DMX 3-channel decoder serves as RGB LED controller for the DMX-512 standard
The input signal is a standard DMX512. Optionally also available: XLR, RJ45 or terminal connections.
The DMX LED Controller is dimmable in 256 steps.
The DMX address can be set via dip switch 1-9 from 0 to 511.
To set the address to 37, set switch 1,3 and 6 (1 + 4 + 32) to ON.
The decoder then uses the addresses 37, 38, 39 and 40 consecutively on RGBW output.
In addition, the DMX LED Controller has a test function.
|Input voltage:||5-24V DC|
|Outup current:||3 channelsx 8A max.|
|Output signal||3CH PWM constant voltage, common +|
|Channels:||three: R- / G- / B- / COM+|
|Dimming range:||256 levels|
|DMX512 Connection:||DMX512 Connection: DMX512 input and output for DMX signals alternatively XLR, RJ45 or terminal connections|
|Output power:||120W @ 5Vdc / 288W @ 12Vdc max. / 576W @ 24Vdc max.|
|Temperature range:||-20 to +55░C|
|Dimensions (LxWxH) in mm:||156 x 78 x 40|
Write the first Review!
Programmable LED driver (I2C), DALI module and I2C USB dongle
with DMX 512 output - RGBW wall control with sensor touch surface
LED driver dimmable via DMX and DALI, 100 Watt, 4 constant current LED outputs
1 channel DMX512 PWM dimmer 10A output current. Dimmable, 512 DMX addresses
WI-D PEN pro SMA Version with 20 DMX 512 channels.
LED driver dimmable via DMX and DALI, 180 Watt, 4 constant current LED outputs
I2C configurable with 4 independent constant current outputs 80mA - 1A