Thanks to its BILEVEL function, this TCI LED driver Sirio 100 can be operated in two different programmable levels (100% brightness and night mode for example)
or dimmable via 1...10V Interface.
For bilevel or bilevel N- operation no additional dimmer is necessary, a 230V control signal is sufficient.
Ideally suited eg for street lighting.
Powerful 100 Watt Multi-current converter - universally applicable. Ext. temperature sensor optional.
Flicker ( Output Ripple ) <= 3%
|Dip-SW||Power||Voltage out||Current out|
|Position 1||35 W||10...140V||250mA const.|
|Position 2||50 W||10...140V||350mA const.|
|Position 3||56 W||10...140V||400mA const.|
|Position 4||63 W||10...140V||450mA const.|
|Position 5||70 W||10...140V||500mA const.|
|Position 6||77 W||10...140V||550mA const.|
|Position 7||84 W||10...140V||600mA const.|
|Position 8||100 W||10...140V||700mA const.|
Max. efficiency: > 92%
All tci Jolly, Maxi Jolly and Sirio converter can be connected to each other via sync-cable. Thus, the control over only one button is possible.
Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves).
Button and installation materials are not included in delivery.
For detailed description please refer to the data sheet.
On request TCI Sirio 100 Bilevel LED Driver is also available as built-in version (ideal for mounting the device) with an altered design (see datasheet) available.
Write the first Review!
Very slim high voltage LED driver 60W, dimmable via DALI, 1..10V and Push; constant currents: 250, 350, 400, 450, 500, 550, 600, 700mA
TCI LED driver 32W; constant currents: 350, 500, 550, 700, 850, 900mA ; constant voltages 10, 12, 24V
TCI LED driver 50W; constant currents: 350, 500, 550, 650, 700, 750, 850, 900, 1050mA; constant voltage: 48V
Maxi Jolly HC DALI TCM LED driver 55W. High LED currents:1,05A, 1,2A, 1,4A, 1,6A, 1,75A, 2,1A const, 48V const.