This power supply from Meanwell HLG-480H is a high performance dust - and waterproof AC-DC power supply up to 480W. The HLG-480H series power supplies is equipped with a dual constant voltage and constant current mode. It is possible to set the output voltage / current limitation separately from each other.
For example, the Meanwell HLG-480H - LED switching power supply by output power 480W and 24V to 54V output voltageis ideally suited for operating 24V lamps, such as for example. LED applications in the street, indoor greenhouse, stadium and architectural lighting.
Up to a power of 480W, several lamps can be connected to a single transformer. Cost savings!
High degree of protection also allows it to be used outdoors. It is also possible to dimming via an additional input. (Type B).
Model designation of the HLG series:
Performance HLG480H Typ -xx"A":
Performance HLG480H Typ -xx"B":
For more information on dimming via DALI and PWM, please refer to this article: DALI PWM Solution for dimming of LED technologyik
|Execution||For LED and lighting applications|
|Model||Switching power supply, Performance H|
|Input||90 - 305 VAC / 127 - 431 VDC 47 -63 Hz|
|Rated Power||480 - 480,6W (voltage depending, see datasheet)|
|Surge solidity||4 kV|
|Output operating parameters||See data sheet|
|Approbation||UL / EN Class C|
|Dimension||262mm x 125mm x 43.5mm (H x W x D)|
On request, we also offer type and voltage ranges.
Further technical data can be found in the datasheet under "downloads"
Write the first Review!
With IP65 is the HLG240H ideally suited for indoor and outdoor applications.
LED driver dimmable via DMX and DALI, 720 Watt, 4 constant voltage LED outputs
Meanwell HLG80H series.
With a universal AC/DC input right up to 305V AC is the HLG80H also suitable for LED's -and street lighting.
TCI DC Jolly
dimmable via 1..10V or "Push-Button"; 350 - 900mA const ; 10, 12, 24V const.
Meanwell HLG100H series
With a universal AC/DC input right up to 305V AC is the HLG100H also suitable for LED's -and street lighting.
Constant voltage and constant current source, dimmable via 0-10V, PWM signal, potentiometer or DALI
Meanwell NPF series
With a universal AC/DC input right up to 305V AC is the NPF-90 also suitable for LED's -and street lighting.
TCI LED driver 20W, small design, dimmable via 1..10V or "Push-Button"; 350mA to 900mA ; 10V, 12V, 24V.
Meanwell HLG120H series
With a universal AC/DC input right up to 305V AC is the HLG120H also suitable for LED's -and street lighting.