An HLG600H is a high performance dust - and waterproof AC-to-DC LED power supply up to 600W. The Meanwell HLG600H - LED switching power supply is suitable in execution, for example -12A, eminently suitable for operations with 12V lamps, in example to low-voltage LED spotlight MR16 / GU5.3 or MR11 and LED Stripes. To save costs, you connect several LED lights on one transformer. This is only possible due to the high output of up to 600W. It is also possible to dim, via an additional input. Due to high standards of protection is this device also ideally suited for outdoor use.
Protections: over -/laod, -/voltage, -/temperature
Cooling by free air convection
OCP point adjustable through output cable or internal potentiometer
Three possibilities of dimmingvia1-10 V,PWMorresistance
TypeHforuseClass IZone 2(gases and vapors)
Universal alternate current up to 305VAC
LED lighting especially street lighting applications
Compliance to worldwide safety regulations for lighting
Performance HLG600H Typ -xxA:
IP65 design for indoor or outdoor installations
IP65 rated. Output voltage and and constant current level can
be adjusted through internal potential meter.
Performance HLG600H Typ -xx"B":
Constant current control regulation about 1-10V or PWM entrance, as well as external potentiometer
IP67 protection. For indoor -and outdoor applications
Technical data to Meanwell power supply HLG:
For LED and lighting applications
Switching power supply, Performance H
90 - 305 VAC / 127 - 431 VDC 47 -63 Hz
480 - 604,8 W (voltage depending, see datasheet)
Output operating parameters
See data sheet
UL / EN Class C
280mm x 144mm x 48,5mm (H x W x D)
On request, we also offer the type C or other voltage ranges.
Constant CurrentConstant Current drivers. Values adjustable via Dip-switches or with poti adjustable. For Details like max. voltage please check datasheet.:> 5A, 13A, 16A, 22A, 40A
Constant VoltageOutput Voltage is constant, e.G. for operation of LED lamps or LED-Stripes:12V, 24V
PowerPower depending of individuel operation mode and configuration:600WMaximum power, depending of configuration and operation mode. For details please check the datasheet.
Dimmable/ControlAvailability to control illumination:1..10VControl input for external voltage from 1-10V or passiv via potentiometer or specific 1-10V device., PWMDimmable via PWM input, Not dimmableNot prepared for dimming