LED driver with integrated dimming function, optionally with 1-10V interface, potentiometer 100 kOhm or potential-free Push Function (Touch Dimming).
Micro Jolly 6 350mA
Micro Jolly 6 500mA
Power: max. 6W
Constant Voltage 12V (only 122428)
Self-protection: against overvoltage primary (EN61547), against short circuit secondary, against overload and overheating
Protection class: P20 independent driver, for indoor use,Class II protection against electric shock for direct or indirect contact.
Dimensions: 50 x 22 x 57 (mm)
Current regulation ▒5 % including temperature variations.
Supplied with terminal cover and cable retainer.
Clamping screws on primary and secondary circuits for cableswith diameter: min. 3 mm - max. 8 mm.
Input and output terminal blocks on the same side, terminal cross-section:
2,5 mm▓ / AWG13 on primary;
1,5 mm▓ / AWG15 on secondary;
1,5 mm▓ / AWG15 on regulation.
Further Informations about TCI BMU MD xxx can be found in the PDF-Data Sheet (Download Tab)
Constant CurrentConstant Current drivers. Values adjustable via Dip-switches or with poti adjustable. For Details like max. voltage please check datasheet.:350mA, 500mA
Constant VoltageOutput Voltage is constant, e.G. for operation of LED lamps or LED-Stripes:12V, 24V
PowerPower depending of individuel operation mode and configuration:<10W/m
Dimmable/ControlAvailability to control illumination:1..10VControl input for external voltage from 1-10V or passiv via potentiometer or specific 1-10V device., Push-ButtonEasy dimmable function. Just push the button short time to dim or switch. Further application please check the datasheets.