CBU-DCS DALI controller via Bluetooth
The CBU-DCS is a Bluetooth controllable, Casambi-capable DALI controller. The CBU-DCS does not have its own power supply. Instead, it is powered directly by a DALI bus.
The CBU-DCS can be used with a DALI sensor for presence detection or use of daylight, or it can be used to control DALI drivers with an integrated DALI bus power supply. When used with drivers, it supports a number of options including device type 6, device type 8, tunable white control (TW) and RGB control.
The CBU-DCS has two connector sets. These connections are internally connected in parallel. In this way, the DALI bus can be guided through the product for easy installation.
- iPhone 4S or later
- iPad 3 or later
- iPod Touch 5th generation or later
- Android 4. 4 or later devices made after 2013 with full BT 4. 0 support
Technical data CBU-DCS:
|Voltage range||9,5-22,5 VDC|
|Idle input current||5 mA|
|Peak input current||30 mA|
|Max. DALI bus current||250 mA|
|Standby power||< 0,1 W|
|Operating frequencies||2,4-2,483 Ghz|
|Max. Output power||+4dBm|
|Ambient temperature, ta||-20...+55°C|
|Max. housing temperature, tc||+65°C|
|Max rel. humidity||0...80%, |
|Wire range||0,5 - 1,5 mm2, 16 - 20 AWG|
|Length of the wire strip||6 - 8 mm|
|Dimensions||40,4 x 36,3 x 14,0 mm|
|Protection type||IP20 (only indoor)|
For more information, please refer to the data sheet in the download tab.
|Dimmable/Control:||Casambi/Bluetooth, DALI, Wireless|