IEC 62386 to PWM Controller LW07 Modul
- Purchase and advice from the LED expert
- Professional products from over 15 years of experience
- LED technology is our passion
- Free shipping for orders over €150 (DE)
IEC 62386 to PWM Controller LW07
The IEC 62386 delivers a PWM signal, in example to control and dim with a LED driver.
In addition the complete IEC 62386 protocol available is for one LED lamp.
- Complete IEC 62386 protocol for one LED engine
- PWM output with 730Hz
- PWM range of 0.1% to 100%
- 5,5V to 40V DC input
- Logarithmic and linear dimming curves
- According and linear dimming curves
- According to DIN EN 62386-101 / -102 / -207
- Ready to use module
There are two versions of LW07 modul:
-01 modul:
IEC 62386 provides a positive and negative PWM signal, available
to control LED driver. All connectors are equipped with clamps.
(LEDs can not be operated directly with the LED Warrior07-01 MOD, it needs
-02 modul:
To control LED modules directly, like -Strips and lamps working with constant voltage.
Output up to 4A and separate grounding.
Technical data of IEC 62386 to PWM Controller LW07:
Input voltage | 5,5V - 40V DC |
Input current | max. 25mA |
DALI Input voltage | max. 24V |
Output | up to 4A (LW07-02) |
PWM Pull Up Resistor | 4k7O (LW07-01) |
Operating temperature | -40°C up to 85°C |
Storage temperature | -55°C up to 100°C |
·Dimmable/Control: | DALI, PWM |
---|
Since 2008 Code Mercenaries develops and manufactures products for LED Lighting.
LED applications can be programmed and controlled by using modern LED dimming technologies such as IEC 62386, DMX, I2C or (Spread Spectrum-) PWM.