High power LED power supply up to 200W with constant voltage - amplitude dimming, waterproof (IP65), control voltage 0-10V
This extremely efficient LED module offers the possibility to be operated as a controllable power supply with constant output voltage (12V and 24V) by connecting the used LEDs in parallel. It is not only controlled by a high-impedance potentiometer and control voltage 0-10V, but also has a dimming function by lowering the voltage. The LED device impresses with its robustness against both high and low temperatures, has a power factor of 98% and a high degree of protection IP65.
The product is available in two versions with a power of 180W and 200W with corresponding constant voltage.
- Waterproof LED power supply with constant output voltage (connect LEDs in parallel)
- Fixed connection cables
- Dimming by lowering of the voltage (amplitude dimming)
- Short-circuit protection, protection against overload
- High efficiency with very high power factor 98%
- Largely cold- and heat-resistant (ta: -40 .. + 50 ° C) with protection class IP65
- Controllable by
- Potentiometer 100kO
- Control voltage 0-10 V (full switch-off only by mains switch)
Do not insert switches into the secondary circuit!
|Input voltage||100..265 Vac|
|Nominal output voltage||12 Vdc||24 Vdc|
|Output power||90..180 W||100..200 W|
|Power factor acc. to EN61000-3-2||0,98|
|Ambient temperature||-40..+50 °C|
|Rated max. temperature||90 °C|
|Control current max.||1,5 mA|
|Inrush current||65 A; 0,085 ms|
|Short circuit protection||yes|
|P Protection level||65|
For further information please refer to the data sheet in the Download tab.
|Constant Voltage:||12V, 24V|
|Power range:||100 - 250 W|
|Application/IP-Code:||IP20 - IP44 (Indoor)|
|#Kategoriefilter:||LED-Trafos- alles mit CV|