LED RGB Modul, IP65
This LED RGB Modul is suitable for ceiling or wall mounting with 50mm sockets as used for GU10/MR16 spots. The RGB LED light source is equipped with two 0. 5m long RGB cables, making it easy to connect several luminaires together.
It has a beam angle of 120° and can be dimmed via PWM.
|Nominal voltage||24 Vdc|
|Rated current||0,2 A|
|Rated power||4 W|
|Energy efficiency class||B|
|Luminous flux||70 lm|
|Beam angle||ca. 120°|
|dimmable||yes, via PWM|
|Lifetime & ignition time|
|Nominal service life||30.000 h|
|Ignition time||< 0,5 s|
|Operating temperatur||60 °C measured at the TC point|
|Storage temperature||-15 to +40 °C|
|2 supply lines||ca. 500 mm (RGB plug / socket)|
The RGB board is suitable for use in damp rooms due to its potting. Up to 10 RGB luminaires may be connected in series. When using a 1m RGB extension cable, a total cable length of 20m should not be exceeded.
For further information, please refer to the data sheet in the download tab.