Phase Dimmer (up to 25W) with DALI control input 86458619

DALI Phase Dimmer 86458619 from Lunatone for Loads of 3W-25W

The PD module is a DALI phase dimmer with a DALI control input which is suitable for  switching and dimming of light sources. It is especially suitable for controlling dimmable LED lamps with up to 25W, for example.

Example use: Integration of 230V~ LED lights with Edison base in the DALI system, e.g. chandeliers with 7x 3W candle lamps.

Are you looking for a DALI phase dimmer with a DALI input for bigger loads? Then choose one suitable for loads of between 10W-300W now.

Product features DALI PD

• Doubled connection terminals for the straightforward looping through of the DALI bus.
• For loads of 3-25W (PD)
• The minimum dim level (MIN LEVEL) can be set via DALI
• Conversion of the DALI 8-Bit ArcPower level into an appropriate phase voltage with phase angle or phase alignment
• Module for integration of 230V light sources designated as dimmable in a DALI circuit
• Dimming of for example 230V LED retrofit lamps via DALI (Device Type 4 from firmware 3.0)
• The module represents a participant on the bus and can be addressed accordingly

Technical data

• Supply: via DALI bus
• Typical power consumption: 6 mA
• Input: DALI
• Dimming: 1 % - 100 %
• Number of DALI addresses used: 1
• Network voltage: 230 VAC
• Phase angle / phase alignment: 0° +- 180°
• Output load range: 3 W - 25 W
• Temperature range 0 °C - 50 °C
• Dimensions (LxWxH): 59mm x 33mm x 15mm
• Use / installation: Box
• Connection wires cross-section: 0.5 - 1.5 mm²

These versions are available with the following specifications: