TCI Sirio 100 LED Driver; TCI 127200, dimmable via 1-10V and Bilevel function
Thanks to its BILEVEL function, this TCI LED driver Sirio 100 can be operated in two different programmable levels (100% brightness and night mode for example)
or dimmable via 1...10V Interface.
For bilevel or bilevel N- operation no additional dimmer is necessary, a 230V control signal is sufficient.
Ideally suited eg for street lighting.
Powerful 100 Watt Multi-current converter - universally applicable. Ext. temperature sensor optional.
Flicker ( Output Ripple ) <= 3%
|Dip-SW||Power||Voltage out||Current out|
|Position 1||35 W||10...140V||250mA const.|
|Position 2||50 W||10...140V||350mA const.|
|Position 3||56 W||10...140V||400mA const.|
|Position 4||63 W||10...140V||450mA const.|
|Position 5||70 W||10...140V||500mA const.|
|Position 6||77 W||10...140V||550mA const.|
|Position 7||84 W||10...140V||600mA const.|
|Position 8||100 W||10...140V||700mA const.|
Max. efficiency: > 92%
All tci Jolly, Maxi Jolly and Sirio converter can be connected to each other via sync-cable. Thus, the control over only one button is possible.
Maximum 10 drivers synchronization, is possible command only one driver (1 Master + 9 Slaves).
Button and installation materials are not included in delivery.
For detailed description please refer to the data sheet.
On request TCI Sirio 100 Bilevel is also available as built-in version (ideal for mounting the device) with an altered design (see datasheet) available.
|Application/IP-Code:||IP20 - IP44 (Indoor)|
|Constant Current:||0,4A, 0,5A, 0,6A, 0,7A, 0,25A, 0,35A, 0,45A|
|Power range:||50 - 100 W|
|Dimmable/Control:||1..10V, Night reduction|