Equipment for Gossen 5032 USB, MAVOMASTER and MAVOSPEC

Equipment for GOSSEN 5032 USB and MAVOMASTER / MAVOPROBE and MAVOSPEC Base/Lite

• Luminance Attachment cd/m² and fL (Order Code M516G) suitable for MAVOLUX and MAVOMASTER
  
  Measures the reflected light, i.e. the luminance of a surface with a measuring angle
  10 approx. 15°. By a micro switch the MAVOLUX or MAVOMASTER automatically detects the luminance
  attachment screwed onto the light measuring probe. The measured luminance value is
  displayed correctly in value and unit.
  Please keep in mind that the luminance attachment is adapted to the light collector of
  10 mm, older luminance attachments can not be used!
  The luminance attachment can not be used for classified luminance measurements!
   
• Adapter disc for Luminance attachment (Order Code M499G) suitable for MAVOLUX and MAVOMASTER
  The adapter disk may easily be plugged onto the luminance attachment.
  * For all kinds of screens the light of the room will be shielded. The measuring results
  will be more precise if you use the adapter disc.
  * On sensitive surfaces the contact pressure is reduced by the big surface of the adapter
  disc. Therefore, the risk of damage during the measurement will be reduced considerably.

• USB cable - suitable for MAVOLUX (order no. V078A)
  USB 2.0 plug A - Mitsumi Mini plug, length 1.5 m

Accessories for MAVOSPEC Lite/Base

• USB cable - suitable for MAVOLUX (order no. V079A)
  USB 2.0 plug A - plug Mini-B, length 1 m

• Replacement or additional battery for MAVOSPEC BASE / LITE (order no. V070A)
  Gossen currently supplies a POLARCELL Premium battery for Nokia 5140. This has a capacity of 1100 mAh instead of the 890 mAh of the regular V070A, which extends the operating time by 23 % on a single charge.

Accessories for MAVOMASTER / MAVOPROBE

• Aluminum transport case (order no. V077A)
  suitable for the MAVOMASTER with rubber sleeve and two MAVOPROBE (LUX, LUX/UA) or one MAVOPROBE MONITOR
   
• Rubber protective cover (order no. V076A)
  for the MAVOMASTER
   
• MAVOPROBE extension 3m (order no. V071A), 5 m (order no. V072A) or 10 m (order no. V073A) length
  Extends the cable between the base and the measuring unit. Optionally available in 3.5 and 10 meters.
  Binder socket - plug series 711
   
• USB adapter cable (order no. V074A)
  USB 2.0 Male A - Binder Socket - Series 711
   
• USB cable (order no. V075A)
  USB 2.0 male A - male Micro-B, length 1 m