Illuxtron Sensor Linea 75 DownlightThese sensor activated recessed floodlights are available in 3000K as switchable version. A choice of housing colours is available, with dimensions of 90 mm x 82 mm. Power rating is 7.0W or 8.0W depending on PSU selection (24 Vdc SELV/220 - 240 V).
What makes these LED downlights so special are the reflectors with microfacets. These microfacets of the sensor series provide perfect illumination of objects and rooms. The microfacettes were developed by the leading Bartenbach Institute for Illuxtron and result in the following remarkable advantages:
Special features of these so-called Dark Light - Reflectors
- High luminous efficacy due to very good efficiency thanks to the very good reflectivity of microfacet technology
- low glare values (UGR index) by avoiding unnecessary stray light
- Ideal light mixing of LED light spectra for very good colour rendering
The built-in sensors incorporate a complex software model that takes all these factors into account and guarantees that the sensor functions correctly. The sensor and lenses are manufactured by Murata Electronics, a global leader in the design, manufacture and distribution of high-quality electronic materials. The Quad sensor is used exclusively in areas where sensitivity and reliability are critical.
An ideal location for these LEDs with integrated motion detectors are smaller rooms that require a single light source, such as toilet areas or corridors. The LEDs operate independently and cannot be used with "master/slave" combinations.
You can find more detailed details of these technical features here.
The most important technical details of the Sensor Linea 75 series:
|Casing color||mat white RAL 9016 (XX=MW)|
matt black RAL 9005 / gold (XX=BL)
|Material||Housing: die-cast aluminium|
Reflector glass: Polycarbonate
|Dimensions||90 mm x 82 mm|
|Hole diameter||75 mm|
|Required installation depth||90 mm|
|Emitted beam angle (FWHM)||24°||60°|
|CRI / Ra (typ.)||83|
|Colour consistency (MacAdam)||SDCM3|
|detection range at 2.5 m altitude||6 m x 6 m|
|detection range at 3.5 m altitude||8 m x 8 m|
|Operating temperature (Ta)||-20°C / +45°C|
|Safety sign||EN60598 / EN62031 / EN62471|
Sensor Linea 75
Depending on the version, an external 24V power supply is required.
You can order these additionally:
- To the overview matching 24V constant voltage sources.
This version is available in a switchable version and as a stepdimming version. You can choose between concrete springs or wire springs. It is also available with a beam angle of 24 ° or 60 °.
Further information about Sensor Linea 75 Downlights can be found in the data sheet.
|Luminous flux||600 lm|
|Lm/W (with ECG)||86||75|
|Type||PSU needed||incl. PSU|
|Input||24 Vdc SELV||220 - 240 V|
|Power||7,0 W||8,0 W|
Note: The data of the article numbers shown in the table show products with concrete springs (fixing method) and a beam angle of 24 °. Articles with wire spring (fixing method) and / or beam angle of 60 °/ 24 ° have the same data.
Data sheets of the downlights Sensor Linea 75-series see download tab.
The products of the manufacturer Illuxtron are manufactured individually according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on the load.
|Application/IP-Code:||IP20 - IP44 (Indoor)|
|Lamp shape:||Recessed ceiling|