Illuxtron Linea DS-AT Downlight
The latest generation of high performance "Chip-on-Board" (COB) LEDs.
The patented COB-LED connector ensures optimum heat dissipation through the heat sink during its entire service life.
Front protection glass
It has been proven that corrosion, smoke and dust deposits on the mirror of an LED luminaire can cause a loss of up to 50% of the light output over time. Illuxtron COB-LEDs are equipped with a front protection glass that reliably protects the LED and the reflector mirror from environmental influences and guarantees a lifetime of high performance.
The Odion and Linea Track spots are equipped with a 3-phase adapter from Nordic Aluminium. The additional retaining clip on the mounting device holds the light firmly in place on the track and even allows vertical wall mounting.
Special features and characteristics
- Attractive price-performance ratio
- Various light colours, beam angles and CRI options
- Excellent thermal conductivity over the entire service life
- Latest generation of high-power „Chip on Board“ (COB)-LEDs
- Front glass protects the reflector against dust and smoke deposits
- Maximum temperature of the body under 70°C; C
- power supplies ENEC/EMC compliant
- Active power factor correction (PFC)
- Electronic components in A-brand quality
The most important technical details of the Linea DS-AT series:
|Housing colour|| |
matt white RAL 9016 (XX=MW)
|Material||Housing: Die-cast aluminium|
Reflector glass: Polycarbonate
|Dimensions||235 mm x 425 mm|
|Required installation depth||> 130 mm|
|Ceiling cut-out|| |
410 x 220 mm: For soft mineral fibre ceilings we recommend the use of a wooden board or a ceiling ring on the back of the board
|Beam angle (FWHM)||18° / 37° / 60°|
|CRI / Ra (typ.)||82 / 97|
|Colour Consistency (MacAdam)||SDCM3|
|IP Code||IP20 / IP44|
|Operating temperature (Ta)||-20°C / +45°C|
|Safety signs||EN60598 / EN62031 / EN62471|
Linea Linea DS-AT
The driver is already available for this downlight.
For further information on Linea DS-AT downlights, please refer to the respective data sheet.
|Colour temperature||3000 K||4000 K|
|Luminous flux||2x 3000 lm||2x 5000 lm||2x 2500 lm||2x 3750 lm||2x 3400 lm||2x 5700 lm|
|Lm/W (with EVG)||78||111||66||99||126||113|
|Power||2x 32,1 W||2x 27,0 W||2x 57,2 W||2x 50,5 W||2x 27,0 W||2x 50,5 W|
*Note: This table shows only the switchable version with the 18° beam angle. This downlight is also available as dimmable version as DALI and 1-10V&Push, as well as different mounting options and with a beam angle of 37° or 60°.
For data sheets of the downlights Linea DS-AT series, see Download Tab:
The products of the manufacturer Illuxtron are individually manufactured according to your specification especially for you. This also explains the longer delivery time of 1-3 weeks depending on capacity utilisation.
|Application/IP-Code:||IP20 - IP44 (Indoor)|
|Lamp shape:||Recessed ceiling|
|Hole diameter:||410 x 220mm|
|Color Temperature/Color:||3000K, 4000K|