OVER 10 YEARS OF EXPERIENCE
FREE SHIPPING FROM € 100,- ORDER VALUE (GER)

Lighting control

Lighting control

Lighting control system via DALI, 1-10V or radio waves

An on / off switch techniques was a day before yesterday. Dim light was yesterday.

Todays modern lighting control systems allows fully automatic service via motion or light sensors. That is one of many capabilities for saving
energy. Programable systems allows individual lighting control. And even without any line placements. Combinations of DALI components and
Enocean radio allow easy and quick installation without additional cabling. Visit our pages to see, what else is possible today.

Lighting control system via DALI, 1-10V or radio waves An on / off switch techniques was a day before yesterday. Dim light was yesterday. Todays modern lighting control systems allows fully... read more »
Close window

Lighting control system via DALI, 1-10V or radio waves

An on / off switch techniques was a day before yesterday. Dim light was yesterday.

Todays modern lighting control systems allows fully automatic service via motion or light sensors. That is one of many capabilities for saving
energy. Programable systems allows individual lighting control. And even without any line placements. Combinations of DALI components and
Enocean radio allow easy and quick installation without additional cabling. Visit our pages to see, what else is possible today.

Close filters
 
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
17 From 18
No results were found for the filter!
Maxi Jolly SV Casambi
Maxi Jolly SV Casambi
LED converter Maxi Jolly SV Casambi; Vin110-240V; 0,35-1,2A; 18,5-50W; Vout 10-53V; Vout max 60V; 124x79x22mm; ENEC Pending
From 93.30€ *
See details
TCI Maxi Jolly HC DALI TCM - LED driver
TCI Maxi Jolly HC DALI TCM - LED driver
Maxi Jolly HC DALI TCM LED driver 55W. High LED currents:1,05A, 1,2A, 1,4A, 1,6A, 1,75A, 2,1A const, 48V const. TCI 122417/4
49.90€ * 63.90€ *
See details
Maxi Jolly HC DALI 60 built-in
LED driver Maxi Jolly HC/2 (BI) DALI
Maxi Jolly HC BI DALI 55W DALI LED-driver for high LED currents: 1,05A  - 2,1A. 48V const.
From 48.00€ *
See details
BL-201-13-868 AP FLEX in installation housing
BL-201-13-868 AP FLEX in installation housing
EnOcean DALI Gateway Flex enables DALI luminaires to be controlled via EnOcean radio. Integrated DALI power supply! Already in the installation housing
474.81€ *
See details
LED constant current operation with Master Slave
LED CC Ballast Maxi Jolly DALI 60W from TCI
TOP LED-DALI control unit 60W linear (AM) and PWM dimmable. A new generation of flicker-free led drivers also while dimming. Adjustable currents from 350mA - 1050mA via dip switch.
From 43.70€ *
See details
PWM-60 power supply
PWM-60 Output LED Supply for LED-Stripes
Meanwell Power Supply with PWM-Control Perfect dimming of LED-Stripes with PWM.
From 29.63€ *
See details
NEW
K-CONSULTATIO product picture
K-CONSULTATIO 60W 230V ZigBee/DALI DT8
Universal surface mounted luminaire 42W/60W 230V for 1800K-16000K, PI-LEDs, DALI DT8 or ZigBee/NeoLink control, IP20, SKI
Content 1
From 653.31€ *
See details
122688 dali led driver slim
TCI Maxi Jolly SLIM HV DALI - LED driver
Very slim high voltage LED driver 60W, dimmable via DALI, 1..10V and Push; constant currents: 250, 350, 400, 450, 500, 550, 600, 700mA TCI 122688
From 55.89€ *
See details
17 From 18

Lighting control, especially LED lamps and luminaires, but how?

Via DALI

DALI is a two-wire system which is wired in parallel to the 230V supply. Simply lay the 5-core cable instead of the 3-core cable. Then connect a DALI controller as "boss" to the bus and, if not already in the controller, an additional DALI power supply.
The individual devices can then be addressed and programmed using free PC software and DALI USB adapter.

Via Enocean radio to DALI

If the additional two bus lines mentioned above are missing, Enocean radio will help.The buttons transmit via 868Mhz radio to the Enocean DALI Controller, which then controls the connected lights. Often a bus can be laid in the ceiling afterwards.

Via 1-10V

Well-known conventional technique. The ballasts have an analogue input. An external voltage of 1-10V can be fed in there. The ECG then dims accordingly. The connection is often active, so that the connection of a 100KOhm potentiometer is sufficient.
Attention when connecting ballasts in parallel (several 1-10V inputs in parallel on one potentiometer). The resistance value must then be halved (at 2), divided by three (at 3).

Via phase dimmer

The good old wall dimmers for leading / trailing edge control should have been obsolete long ago, because with the introduction of LED technology they are no longer suitable. They were designed to control resistive loads such as incandescent lamps. Nevertheless, there are also LED ballasts which work more or less with this control. Disadvantage is the low compatibility and limited control. Low values can lead to flickering or sudden shutdown.

Via Bluetooth

Every smartphone has a Bluetooth interface. It is therefore obvious to simply integrate a corresponding receiver module into the luminaire. Modules in the size of a matchbox have proven themselves with the name Casambi. UAnd for comfort, there is even an attractive Casambi wall switch, which can be mounted as required. Or a Casambi Switch Interface for the flush-mounted box.

Via Digitalstrom

Digitalstrom is actually Powerline-Communication. Instead of the well-known chandelier terminals, similar terminals are now used, but with intelligence. Every electrical consumer is now given a virtually "switch". The corresponding commands are then sent over the power supply line via a central server.

Via DMX

Fast light changes for stage lighting and discos - that is something for the DMX bus. Similar to DALI, all luminaires are connected to a bus system. Only the bus wiring is much more demanding, but very fast. Further detailed information on lighting control can be found here.

Via Zigbee

More and more this sytem becomes famous, because of cheap gateways and components. It is easy to connect into smarthome systems. For easy lighting control find zigbee LED drivers and other zigbee hue devices here.

And many othersThe systems listed above are considered to be widely used and established. In addition, there are many different solutions available on the market, especially with Smart-Home, some of which are stand-alone solutions. Occasionally, these then fall back on the above standards.
Viewed